.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Reliably detects luminescent plastics, coatings, lubricants, and marks on irregular or reflective surfaces. Housed in IP67-rated aluminum housing for use in rugged industrial environments.
- High-power UV emission provides a consistent beam for improved sensitivity and reliable detection
- Emitted spot is a line of light formed by 6 UV LEDs
- Three push buttons to adjust the sensor’s switch point sensitivity and enable or disable a 20 ms off delay
- Variable operating distance depending on model: 15, 30, or 40 mm
- 5 position swivel QD connector to accommodate cramped mounting situations
Downloads
Literature
Application Notes
Detecting Plastic Wrap on a Can
In the application shown, the plastic wrap surrounding the cap and the top of the can serves several purposes: it acts as a tamper-proof seal on the can, it prevents the cap from disconnecting during transit, and it holds the applicator tool to the can. Additionally, the plastic serves as error-proofing to protect customers from spilling the contents before they are ready to use it. For these reasons it is important that cans without the plastic wrap are rejected.
Product Selection
-
QL56M6XD15BQ
QL56 Series Luminescence Sensor
Range: 10-20 mm; Input: 15-30 V dc
Output: Bipolar (1 NPN and 1 PNP); 0.75-5.5 V analog
5-pin M12 Integral QD -
QL56M6XD30BQ
QL56 Series Luminescence Sensor
Range: 20-40 mm; Input: 15-30 V dc
Output: Bipolar (1 NPN and 1 PNP); 0.75-5.5 V analog
5-pin M12 Integral QD -
QL56M6XD40BQ
QL56 Series Luminescence Sensor
Range: 30-50 mm; Input: 15-30 V dc
Output: Bipolar (1 NPN and 1 PNP); 0.75-5.5 V analog
5-pin M12 Integral QD