Guided Picking Reduces Assembly Errors in Data Center Power Equipment
A manufacturer of custom power distribution systems needed to reduce rework and improve throughput on a line assembling units bound for data centers. The assembly was manual, with part selection managed using printed parts lists. Banner’s PTL110 pick-to-light devices, deployed with the Pick-to-Light Solutions Kit and PICK-IQ, replaced paper-based picking with guided bin indication and pick confirmation at the workstation.
The Challenge
The manufacturer assembled its data center power distribution units by hand across 70 workstations, each containing 50 to 70 parts bins stocked to cover the full range of units assembled on the line. Any one unit required parts from only some of those bins, and the only thing telling a technician which bins to pick from was a printed parts list.
Using that list, technicians had to keep track of which parts they picked and which were still needed. If a required part was missed or a part was picked from the wrong bin, the error could go undetected until inspection after assembly. Correcting the error required rework on the unit, adding time, reducing throughput, and increasing cost.
The Solution
Banner’s Pick-to-Light Solutions Kit replaced printed pick sheets with guided bin-level picking at each workstation. Instead of working from a printed parts list and manually keeping track of selected parts, the technician selects the unit being assembled on the kit’s touchscreen HMI. The system then illuminates only the PTL110 devices mounted on the bins needed for that build.
The line builds several unit configurations, so the set of required parts changes from job to job. For each configuration, the manufacturer saves a recipe on the HMI that tells the system which bin-mounted PTL110s to light for that build. The recipe can also include a pick sequence for stations that use ordered picking. Once saved, the recipe can be loaded whenever that unit configuration is assembled, giving the technician the correct bin guidance for that build.
The Pick-to-Light Solutions Kit makes the system practical to deploy across stations with 50 to 70 pick points. Its pre-programmed DXM700 controller runs the pick-to-light logic, while PICK-IQ provides fast communication between the controller and the PTL110 devices. The devices connect in series with M12 connectors, allowing each workstation to be wired in a single device chain and adjusted as bin layouts or builds change.
With guided indication and confirmation at the bin, technicians can find the bins required for each build and keep track of completed picks without managing the process from a printed list. At any required bin where the technician has not confirmed the pick, the PTL110 remains illuminated, helping prevent picking errors from reaching final inspection and reducing the rework that slowed throughput and increased cost.
Featured Products
-
PTL110 Series Scalable, Versatile Pick-to-Light Devices
PTL110 pick-to-light devices are flexible and scalable to a wide variety of applications. With fast response times and flexible installation options, PTL110 systems improve speed, productivity, and quality in picking, kitting and related applications.
-
Pick-to-Light Solutions Kit
Banner's new Pick-to-Light Solutions Kit for improved productivity in picking systems is an easy-to-use solution to reduce error during the assembly process.