SGR3-533Q8E
Item Detail Products for Industrial Automation
This part is obsolete. Contact Banner Engineering for information about selecting a suitable replacement.
Certifications
Compatible Amplifiers
Where applicable, maximum range for opposed mode fibers is also dependent on fiber length.
Accessories to Complete Your System
Add all or individual items to your cart. More options available below.
Specifications
- Low Profile
- No
- Resolution Type
- Body Detection (grids and points)
- Max Operating Range (m)
- >20
- Defined Area Height Range (mm)
- >950 - <=1300
- IP Rating
- IP65
- Supply Voltage
- 24 V dc
- Pin / Wire Count
- 8
- Item Status
- INACTIVE
- Primary Housing Material
- Aluminum
- Safety Level
- Type 4
- Effective Aperture Angle
- Type 4 Per IEC 61496-2
- Connector Type
- Wiring Chamber
- Defined Area Height (mm)
- 1066
- Dimensions WxD (mm)
- 52 x 55
- Overall Length (mm)
- 1251
- External Monitoring Device
- 1 or 2 Channel
- Fixed Blanking
- No
- Housing Finish
- Yellow Polyester
- Number of Pins (Receiver/Emitter)
- 8
- Operating Distance (m)
- 0.8 - 20
- Operating Temperature
- 0 to +55 deg. C; RH 95%
- PL Rating
- N/A
- Recovery Time
- N/A
- Resolution (mm)
- 3 - 533
- Reduced Resolution
- No
- Response Time
- 24
- Electrical Safety Class
- III
- Scan Code
- Selectable
- Shock
- 10g at 16ms (6000 cycles)
- Short Protection
- Yes
- System Type
- Receiver
- Vibration
- 10-55 Hz at 0.35 mm
- Auxiliary Output
- No
- Fault Output
- No
- Housing Material
- Aluminum; PBT; Acrylic
- OSSD Rating
- 24 V dc at 0.5 A each
- Supply Current
- 500 mA max.
- Trip/Latch Output
- Selectable
- Test Input
- No
- Feature: Washdown Rated
- No
- Feature: Cascade
- No
- Feature: End-to-End Sensing
- No
- Feature: ESD Safe
- No
- Feature: Integral Muting
- No
SGR3-533Q8E
Item Detail: Products for Industrial Automation