.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Emergency Stop Buttons on a Conveyor
Challenge
As products move down the conveyor, Emergency Stop (E-Stop) buttons are linked 8 to 10 feet apart to ensure all areas of the conveyor are covered in case of an emergency. In an emergency, operators press the red button of the E-Stop to immediately shut down the machine. It can be time-consuming to determine exactly what E-stop button is pressed, and typically an emergency stop condition requires a reset of all the E-Stop buttons.
Solution
Banner’s 30 mm mount E-Stop buttons work well in this type of application because they have an illuminated base that turns from yellow to flashing red when actuated. The red flashing illumination of the E-stop button visibly alerts operators which button was pressed so they can quickly and easily fix the problem to reduce down time and only reset the button that was activated.
Along with visible indication of an E-Stop button, the illuminated E-stops are available in an all-in-one enclosure with no assembly, individual wiring or additional enclosures required. With a 30 mm threaded mount, a simple installation reduces intensive labor costs.
The 30 mm mount illuminated E-stop button has a unique 360 degree round housing, with a red button and yellow background, meeting worldwide safety standards. Models are also available in a non-lit, solid black base for additional safety applications.
Featured Products
30mm Mount Emergency Stop Buttons
Illuminated button for easy identification of which e-stop has been activated. 30 mm mounting base for easy installation and hookup with no assembly.
30 mm Mount Emergency Stop Buttons
Patented 30 mm mounting base enables easy installation and hookup with no assembly, individual wiring or additional enclosure required.