QS18 Series All Purpose Photoelectric Sensor
All purpose photoelectric sensor with universal housing design and 18 mm threaded barrel is an ideal replacement for hundreds of other sensor styles.
New Products | news
New Products | Asset Monitoring Gateway with Snap ID
New Products | event
New Products | news
New Products | news
New Products | VE Smart Camera
New Products | news
New Products | news
New Products | news
New Products | Asset Monitoring Gateway with Snap ID
Application | DXM
Success Story
Success Story | K90 Pro
Success Story | iVU Barcode Reader
Success Story | OTB & LTB
Success Story | PTL110
Success Story | WLB32
Success Story | K50L
Success Story
Success Story | iVu Plus TG
Success Story | K50 Touch
Welcome to a short how-to video that will cover the window set mode for the QS18 Expert Photoelectric Sensors from Banner Engineering.
The window set mode measures the light returning to the receiver and sets a window of switching thresholds 12.5% above and 12.5% below the taught condition.
To begin, press and hold the pushbutton for two to four seconds, until the green power LED turns off and the amber output LED flashes once per second.
Present the target condition and push the button two times consecutively.
The power LED will flash three times and then turn on solid, indicating that the sensor has been taught successfully.
If you need to flip the output condition, push the button seven times.
That covers the basics for using the windows set mode for the QS18 Expert Photoelectric Sensors.
For more information, visit bannerengineering.com
Application solutions, new product updates, answers to frequently asked questions, and more delivered 1-2 times a month.