Rope pull emergency stop switches, when used with steel wire rope, provide emergency stop actuation for conveyors and large machinery.
- Available spans range from 6 to 100 m
- Trip and latch switch models are available
- Minimum switch life is 1 million operations
- Heavy-duty switch housings withstand harsh environments
- Switch activates if the rope is pulled, becomes loose or breaks
- Design meets positive opening requirements for rope pull switches
绳索牵引紧急停止开关，与钢丝绳一起使用时，为传送带和大型机械提供紧急停止驱动。
- 可用跨度范围介于6米到100米之间
- 可使用跳闸和锁存开关型号
- 最小开关寿命为100万次操作
- 重载开关外壳可承受恶劣的环境
- 如果绳索被拉动、变松或折断，开关就会启动
- 设计符合绳索牵引开关的强制打开要求
下载
Technical Literature
Marketing Literature
应用说明
传送带上的紧急情况指示
邦纳RP-LS42安全拉绳可以拉动作业线传送带，来作为指示紧急情况并立即关闭传送带的一种方式。如果在发生紧急情况时使用拉绳开关，可能难以定位准确的拉绳位置。K30指示灯可以与拉绳开关配对，来指示拉绳位置。这可以快速方便地指示紧急情况发生位置，有助于尽快恢复正常运行。
急停（中心固定式拉绳开关）
拉绳开关沿传送带敷设，以便操作员在沿线的任意位置抓住拉绳开关并拉动，从而立即停止传送带。
产品选型
-
RP-LM40D-6
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 6 m Max Range
1 NC Rope Pulled Contact
1 NC Rope Break Contact -
RP-LM40D-6L
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 6 m Max Range
Latch Actuation, 1 NC Rope Pulled Contact
1 NC Rope Break Contact -
RP-QMT72D-20L
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 20 m Max Range
Latch Actuation, 1 NC Rope Pulled Contact
1 NC Rope Break Contact -
RP-QM72D-12L
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 12 m Max Range
Latch Actuation, 1 NC Rope Pulled Contact
1 NC Rope Break Contact -
RP-QM72D-6L
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 6 m Max Range
Latch Actuation, 1 NC Rope Pulled Contact
1 NC Rope Break Contact -
RP-QMT72F-12L
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 12 m Max Range
Latch Actuation, 2 NC Rope Pulled Contact
2 NC Rope Break Contact -
RP-QMT72E-12L
Heavy Duty Metal Stop Control Rope Pull
Ring Attachment, 12 m Max Range
Latch Actuation, 1 NC Rope Pulled Contact
1 NC & 1 NO Rope Break Contact