- Models with IO-Link enable a point-to-point communication link between a master device and a sensor, facilitating remote monitoring, teaching, and configuration
- Easy to read dual digital displays simultaneously show signal level and threshold
- Simple user interface ensures easy sensor set-up and programming
- Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially low contrast applications
- IO-LINK models available
- Models for detection of extraneous light sources available
- Response speeds as fast as 200 µs
- Thermally stable electronics minimize warm-up drift and reduce the effect of side-by-side mounting of multiple fiber amplifiers
- ECO (economy) display mode reduces amplifier power consumption by 25%
- Cross talk avoidance algorithm allows two fiber assemblies to operate in close proximity for many applications
下载
Technical Literature
Product Data Files
PLC Support Files
Software
Marketing Literature
应用说明
取放机器边缘检测
光纤凭借其小巧的外形而成为取放机器的理想解决方案。DF-G1放大器可与光纤分开，这样，操作员就能够轻松查看双数显屏幕，以便进行数据监测。此外，串扰抑制算法使两个或多个放大器能够并排安装。
车窗颜色验证
邦纳的DF-G1光接收传感器的通过接收透过车窗的光量来判断车窗是否带颜色。DF-G1带有一个简单的按钮设置，便于在传送带旁做出调整。直观的用户显示允许传感器立即做出反馈。
光接收器检测宽光谱范围
邦纳的DF-G1光纤光接收器是一款经济型的独特产品，专为直接安放在测试设备中确保灯光正常运作而设计。该光接收器采用与其他DF-G1型号具有相同的双显示和编程接口，可以与装配和测试设备控制系统集成并通过输出口连接，进行通过/失败检查。
水下晶圆盒检测
晶圆被装在传送带上的一个盒子中，盒子完全浸没在去离子水中并从一个工序传送到另一个工序。D10 传感器配上特氟隆封装的对射式光纤，安装在传送带两侧。当盒子出现时，对射光束就会被阻断。
小部件计数
邦纳DF-G1系列放大器可向小部件计数应用提供简单设置和校准。设置放大器后，由于能够同时显示信号电平和阈值，所以易于阅读的数字双行显示屏将让操作变得更简单。
注射器检查
DF-G1传感器可轻松配置为在有限空间包装过程中对小型目标（如注射器）进行检测。凭借邦纳强大的示教和设置方法，最佳增益和阈值可用于一系列应用，包括低对比度和远程应用。
视频
操作指南：DF-G 暗态设置
这段视频介绍了邦纳 DF-G 光纤放大器暗态设置功能的基本设置。
操作指南 - DF-G 动态示教
这段视频介绍了邦纳 DF-G 光纤放大器动态示教功能的基本设置。
操作指南：DF-G 2 点示教配置
这段视频介绍了邦纳 DF-G 光纤放大器 2 点示教配置的基本设置。
操作指南：DF-G 亮态设置
这段视频介绍了邦纳 DF-G 光纤放大器亮态设置功能的基本设置。
操作指南：DF-G 窗口设置
这段视频介绍了邦纳 DF-G 光纤放大器窗口设置功能的基本设置。
DF-G1液位检测[视频]
DF-G1 Expert 双数显光纤放大器是一种简单易用的光纤系统，它能够快速设置，缩短安装时间。用户界面直观，放大器采用双数显，同时显示实时信号值和阈值，操作简单。DF-G1 温漂极小，上电启动快。它是泄漏检测和液位控制应用的理想选择。
-
DF-G1-PS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-PS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-NS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-NR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-KS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 18-30 V dc
Output 1: Push/Pull with IO-Link; Output 2: PNP only
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-NS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-PR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-KS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
2 m (6.5 ft) Cable -
DF-G1-KS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
4-pin M8 Integral QD -
DF-G1-NS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-KS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NF-Q7
DF-G1 Dual Display Fiber Amplifier
With Fluorescent Filter
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-NR-9M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source
Input: 10-30 V dc; Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-NR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-PR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
9 m (30 ft) Cable
-
DF-G1-PS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-PS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-NS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-NR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-KS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 18-30 V dc
Output 1: Push/Pull with IO-Link; Output 2: PNP only
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PR-Q7
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
4-pin M8 Integral QD -
DF-G1-NS-Q5
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
2 m (6.5 ft) Cable -
DF-G1-PR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-PS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NR-2M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
2 m (6.5 ft) Cable -
DF-G1-KS-2M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
2 m (6.5 ft) Cable -
DF-G1-KS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
4-pin M8 Integral QD -
DF-G1-NS-Q7
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-KS-Q3
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: Push/Pull with IO-Link
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NF-Q7
DF-G1 Dual Display Fiber Amplifier
With Fluorescent Filter
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
4-pin M8 Integral QD -
DF-G1-NR-9M
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source
Input: 10-30 V dc; Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-NR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-NR-Q5
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 NPN
150 mm (6 in) 4-pin M12 Pigtail QD -
DF-G1-NS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 NPN
9 m (30 ft) Cable -
DF-G1-PR-Q3
DF-G1 Dual Display Fiber Amplifier Light Receiver
Range: Depends on Fiber and light source; Input 10-30 V dc
Output: 1 PNP
150 mm (6 in) 4-pin M8 Pigtail QD -
DF-G1-PS-9M
DF-G1 Dual Display Fiber Amplifier
Range: Depends on Fiber; Input 10-30 V dc
Output: 1 PNP
9 m (30 ft) Cable