Sample Tank Level Configuration for DXM1x0-Bx Models
zip
DXM1X0-BX 型号的储罐料位配置示例
概述
在这个储罐料位应用示例中，用户可以使用操作规则设置警报范围。K50U 超声波传感器监控储罐料位。无线 TL70 塔灯使用红灯和黄灯发出储罐料位信号。
在该配置文件中，首先是对 DXM100-Bx 无线控制器的电池和输入电源进行基本监控。它还监控 DXM 控制器的通用输入以及电池或电源的使用时间。
此外，XML 还可以监测通过无线 Q45U 节点连接到 DXM100-Bx 无线控制器的 K50U 超声波传感器的距离。然后，距离测量结果会传输到三色（绿、黄、红）TL70 无线多层警示灯上。
这就为客户提供了一种使用三色塔灯指示五种状态的方法。红色 LED“接近过满”和“过满”状态的主要用途，是为操作员留出时间为储罐加注物料。
机器操作员更关注适当数量（绿灯）、接近清空（黄灯）和清空（红灯）状态。一般来说，如果绿灯不亮，他们就会想为储罐加注物料。如果在储罐加注操作过程中出现储罐过满的情况，他们也希望有时间采取纠正措施。
XML 配置文件包括如何使用操作规则监控 DXM100 方方面面的示例，还设置了每周通过电子邮件发送存储日志的计划。
This sample tank level application allows users to set alert ranges using action rules. A K50U Ultrasonic sensor monitors tanklevels. A Wireless TL70 Tower Light uses the red and yellow lights to signal tank levels.
This configuration file starts with a basic monitoring of the battery and incoming power to the DXM100-Bx Wireless Controller. Italso monitors the Universal Inputs of the DXM Controller and the time that it is operating on battery or a power supply.
In addition, the XML is designed to monitor the distance from a K50U ultrasonic sensor connected to the DXM100-Bx WirelessController using a Wireless Q45U Node. The results of the distance measurement are then transferred to a three-color (green,yellow, red) TL70 wireless stack light.
This provides the customer with a method for using a three-color tower light to indicate five statuses. The primary use of theNearing Too Full and Too Full red LED status was to allow the operator time to fill the tank.
Machine operators are more concerned with the Proper Amount (green), Nearing Empty (yellow). and the Empty (red) statuses.Generally, if the green light was not on, they wanted to start filling the tank. If during the tank filing operation the tank wasoverfilled, they also wanted time to take corrective action.
The XML configuration file includes examples of how to use the action rules for monitoring aspects of the DXM100, and there is aschedule set up for emailing stored logs on a weekly basis.